Thanks for signing our online Release of Liability Smart Waiver! Your email address has been verified! This waiver will need to be signed every time you rent. If you have any questions feel free to call us at 801-523-9108 or email us at [email protected]
Please give a quick read to the information below, especially if you are a first time renter/user
STAND-UP PADDLE BOARDS (SUP)
SUP SET-UP VIDEO
If you’ve never rented one our STAGE Stand-Up Paddle boards (SUP) before please watch this short n’ sweet set-up video.
SUP SET-UP QUICK GUIDE
- Make sure the board’s valve is UP before inflating (push down & turn 1/4, to alternate between UP & DOWN position)
- Make sure hose is connected to “INF” or “OUT” side of Pump
- Make sure to start on “DOUBLE ACTION” setting on Pump, when reaching 8+ psi switch to “SINGLE ACTION“
- Fill SUP up to minimum of 10 psi & up to maximum of 15 psi (If you are renting the X10 or F11 3-Chamber board, fill the side chambers to 3-4 psi)
- Detach hose and screw on valve cover cap (IF AIR BLOWS BACK OUT: Make sure the valve is UP, see step 1.)
- Attach FIN to bottom of board
SUP PACK-UP GUIDE
- Detach FIN from bottom of board
- Rinse/Wipe down SUP Board to remove any dirt & corrosion
- Push Valve DOWN & turn 1/4 to lock it in deflate mode (air should be blowing out of valve)
- Start rolling board up, starting at the tail
- Use Fastening strap to keep the board tightly rolled up
- Place Rolled up SUP in bag, followed by all the accessories
SUP RETURN CHECKLIST
This checklist includes all the items you’ll be responsible to bring back to us! Any missing / broken items must be paid for upon returning.
- (1) SUP Board Cleaned & Rolled Up ($399+ to replace)
- (1) Carrying Backpack ($40 to replace)
- (1) Fastening Strap (To wrap around rolled up board) ($5 to replace)
- (1) 3-pc Aluminum SUP Paddle ($45 to replace)
- (1) STAGE Double Action Hand Pump ($45 to replace)
- (1) Pump Hose ($10 to replace)
- (1) Ankle Leash ($15 to replace)
- (1) Attachable Fin ($15 to replace)
KAYAKS & SIT-DOWN PADDLE BOARDS
K1 & K2 ECONOMY KAYAK – QUICK SET-UP GUIDE
- Make sure Valve is UP before inflating (push & give 1/4 turn to alternate between DOWN & UP)
- Make sure hose is connected to “INF” or “OUT” side of Pump
- Make sure to start on “DOUBLE ACTION” setting on Pump, when reaching 8+ psi switch to “SINGLE ACTION“
- Fill Kayak up to minimum of 3 psi & maximum of 4 psi
- Detach hose and screw on valve cover cap (IF AIR BLOWS BACK OUT: Make sure the valve is UP, see step 1.)
- Attach Seat(s) in Kayak & Attach FIN to bottom of Kayak
K1 & K2 RETURN CHECKLIST
This checklist includes all the items you’ll be responsible to bring back to us! Any missing / broken items must be paid for upon returning.
- (1) Clean Kayak ($399+ to replace)
- (1) Carrying Bag ($40 to replace)
- (1-2) Aluminum Kayak Paddle(s) ($50 to replace)
- (1) STAGE Double Action Hand Pump ($45 to replace)
- (1) Pump Hose ($10 to replace)
- (1) Attachable Fin ($15 to replace)
- (1-2) Attachable Seat(s) ($40 to replace)
K11 ECONOMY KAYAK / SIT-DOWN PADDLE BOARD – QUICK SET-UP GUIDE
- Make sure Valve is UP before inflating (push & give 1/4 turn to alternate between DOWN & UP)
- Make sure hose is connected to “INF” or “OUT” side of Pump
- Make sure to start on “DOUBLE ACTION” setting on Pump, when reaching 8+ psi switch to “SINGLE ACTION“
- Fill K11 up to minimum of 10 psi & maximum of 15 psi
- Detach hose and screw on valve cover cap (IF AIR BLOWS BACK OUT: Make sure the valve is UP, see step 1.)
- Attach Seat in Kayak & Attach FIN to bottom of Kayak